- Before each use, a visual inspection must be done inside the air chamber. If a defect is found, the device must be replaced.
- Remove the cap from the metered dose inhaler, shake well and insert it into the air chamber.
- Apply the mask to the face and make sure that there will be no losses during inhalation.
- Depress the metered inhaler while making sure the patient inhales slowly. If the sound of the whistle is heard then the inhalation should be done at a slower rate. During inhalation, the inhalation pointer moves towards the patient as the patient inhales normally.
- The mask should remain applied to the patient’s face for 5-6 inhalations with one spray.
* The inner tube should be replaced after one year of use.
CLEANING INSTRUCTIONS
- Remove the rear part of the air chamber.
- Immerse all parts of the air chamber in warm water and a mild cleaning solution. CAUTION! Avoid rubbing the air chamber parts with a cloth or sponge.
- Rinse the air chamber parts with clean water. Or remove all parts of the air chamber and place them in the top rack of the dishwasher (up to 70°C) in an upright position.
- Place the inner tube sections vertically on a dry surface to dry. CAUTION! Avoid drying the air chamber parts with a cloth or cleaning paper.
- Before reassembling the tube, make sure all parts are dry.